TinyTracker

New TinyTracker Firmware Available

We're happy to release a new version of the TinyTracker firmware. Rev G as it's affectionately known effectively eliminates the need for other firmware versions! All of the possible tracking parameters are stored in EEPROM. Using a simple Arduino program all the parameters may be customized as desired. While the firmware upgrade process is a bit more involved since you have to setup the Arduino IDE, the benefits of full customization are worth it. As with our other firmware upgrades, you'll still need a USBasp or similar AVR programmer for transferring code to your TinyTracker device.

TinyTracker HD

While the original TinyTracker has been a huge success, it is limited to about 2A maximum current which isn't enough for larger heavy duty tracking motors. Responding to the need for a tracking controller that can handle more power, Home CSP Inc.created the TinyTracker HD. The HD boards are distinguishable at a glance from the original by the red PCB. While it has the same basic footprint and microprocessor as the original TinyTracker, the new design features MOSFETs instead of the Darlington transistors on the original, and should handle up to 8A of current.

Subscribe to RSS - TinyTracker